A tradition of service.  The future of adhesives.

Call us: 1.800.223.0069

Woodworking

Multibond 2025

Multibond SK-8 is the first one-part crosslinking polyvinyl acetate emulsion that meets
ANSI/HPVA HP-1-2000 Type 1 and ASTM D-4317 Type 1 Wet Use. It is widely used
for cold press lamination by skateboard manufacturers due to its superior performance.
It can also be hot pressed and used in applications that are radio frequency cured.
It has a low minimum use temperature and a long assembly time.

Multibond SK-8

Multibond SK-8 is the first one-part crosslinking polyvinyl acetate emulsion that meets
ANSI/HPVA HP-1-2000 Type 1 and ASTM D-4317 Type 1 Wet Use. It is widely used
for cold press lamination by skateboard manufacturers due to its superior performance.
It can also be hot pressed and used in applications that are radio frequency cured.
It has a low minimum use temperature and a long assembly time.

Mulitbond 2015

Multibond 2015 is a one-part crosslinking polyvinyl acetate emulsion adhesive
developed for a wide range of laminating as well as edge and face gluing operations.
Multibond 2015 has a proven 20 plus year history for wood bonding. It is highly
water-resistant and offers additional protection from bleed-through on veneers.

Aquence PL 1105

DORUS® PL 0857 is formulated polyvinyl emulsion adhesive
for laminating foil, vinyl and composite facings to glass
insulation mat. It features excellent machinability, outstanding
mileage and easy clean-up with water.

Dorus PL 0857

DORUS® PL 0857 is formulated polyvinyl emulsion adhesive
for laminating foil, vinyl and composite facings to glass
insulation mat. It features excellent machinability, outstanding
mileage and easy clean-up with water.

Titebond Slowset

Titebond Slow Set is the slowest setting, ready-to-use aliphatic resin emulsion adhesive.
It was developed for applications which need a long assembly time between adhesive
application and clamping. Titebond Slow Set has both heat and solvent resistance and
good sandability. It is most often used for hand rails and stringer assembly

Titebond Quickset 1000

Titebond Quickset 1000 FR is a fast setting, water-based vinyl acetate ethylene copolymer emulsion adhesive
designed to bond HPL to particleboard and fiberboard. The flexible adhesive generates fast initial tack making it
a good fit for nip roll operations. It has excellent heat resistance and exhibits good fire retardant characteristics.

Laminating 25

Laminating 25 is a moderately fast-setting adhesive for cold pressing high-pressure
laminate to a variety of core materials. It is formulated to combine a long assembly
time with a moderately fast press time. Laminating 25 fits the needs of the majority
of industry combining a 15-minute lay up time with about a 45-minute press time.

Doorbond 200

Doorbond 200 is a fast setting, one-component polyvinyl acetate emulsion adhesive. It is designed for hot or cold press manufacture of flush and architectural doors. Doorbond 200 produces a water and heat resistant bond on various rail, stile and skin substrates including: wood, hardboard, MDF, particleboard and high pressure laminates. This product has been formulated to prevent bleed-through under normal operating conditions.

Assembly High Tack

Assembly High Tack is a ready to use aliphatic resin emulsion adhesive. For over
55 years, it has set the standard for quality woodworking. It is very fast setting for
short clamp times. It has high solvent-resistance and good sandability. Assembly High
Tack can be used in general assembly and edge and face gluing applications for
interior use. It can also be used in conventional cold press equipment.